Maintenance rules for the hottest atomic fluoresce

2022-08-13
  • Detail

Atomic fluorescence photometer maintenance rules

1 The surface treatment of the instrument is spray paint, which also points out the direction for the development of plastic granulator technology in China. In order to keep the surface of the instrument clean, it should be scrubbed frequently. You can use detergent, washing powder and other aqueous solutions to wet and wring the gauze dry, and finally scrub it again with clean sand cloth soaked in water. It is forbidden to wipe it with alcohol or organic solvents. Please unplug the power supply when scrubbing

2. The lens of the instrument should be kept clean. In case of any dirt, wipe it with lens wiping paper in time

3 Due to acid gas erosion, white spot deposits may appear on the front cap of the lens and the atomizer, which should be wiped with clean gauze or filter paper to keep it clean

4. In general, the cleaning of quartz furnace tube can be troublesome and artificial error. Roll the filter paper into a rod and stretch it into the tube to wipe. If it has been used for a long time and is seriously polluted, it can be disassembled and soaked in dilute acid for a few hours, and then gently wiped clean

5. Keep the surface of hydride/mercury vapor generator clean, and often wipe it with clean wet gauze to maintain the transparency of the generator. It is absolutely forbidden to use toluene, chloroform and other organic solvents. There are some high-grade tensile machine solutions on the market in addition to the above items, so as not to damage the generator

Copyright © 2011 JIN SHI